学歴は実力と等しくなく、能力とも等しくないです。本当の能力は実践で鍛えたもので、学歴と直接な関係がないです。「私はだめです。」と思わないでください。Avayaの3303試験に申し込んだあなたは自分が合格できないなんてを心配だったら、JPexamのAvayaの3303試験トレーニング資料を利用してください。学歴がどんなに高くて、能力がどんなに低くても、首尾よく試験に合格することができます。
IT業種は急激に発展しているこの時代で、IT専門家を称賛しなければならないです。彼らは自身が持っている先端技術で色々な便利を作ってくれます。それに、会社に大量な人的·物的資源を節約させると同時に、案外のうまい効果を取得しました。彼らの給料は言うまでもなく高いです。そのような人になりたいのですか。羨ましいですか。心配することはないです。JPexamのAvayaの3303トレーニング資料はあなたに期待するものを与えますから。JPexamを選ぶのは、成功を選ぶということになります。
3303認定試験と言ったら、信頼できるのを無視することは難しい。JPexam の3303試験トレーニング資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。JPexamは世界的にこの試験の合格率を最大限に高めることに力を尽くしています。
試験番号：3303問題集
試験科目：Avaya Proactive Contact Implementation and Maintenance Exam
最近更新時間：2014-04-10
問題と解答：全82問
100％の返金保証。1年間の無料アップデート。
Avayaの3303認定試験はJPexamの最優秀な専門家チームが自分の知識と業界の経験を利用してどんどん研究した、満足Avaya認証受験生の需要に満たすの書籍がほかのサイトにも見えますが、JPexamの商品が最も保障があって、君の最良の選択になります。
JPexamはIT認定試験の3303問題集を提供して皆さんを助けるウエブサイトです。JPexamは先輩の経験を生かして暦年の試験の材料を編集することを通して、最高の3303問題集を作成しました。問題集に含まれているものは実際試験の問題を全部カバーすることができますから、あなたが一回で成功することを保証できます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/3303_exam.html
NO.1 To configure the opt-out feature for a virtual job, you need to select the check-box against "Should 'opt
outs' be enabled". This enables other configuration parameters for this feature.
Which three configuration parameters are correct? (Choose three.)
A. Opt-out Digit: 5
B. When an opt-out happens, transfer to .. : Transfer to a VDN
C. Message to be played when opt-out fails : 1
D. When opt-out happens, transfer to : Transfer to an outbound job
E. Opt out Digit: #
Answer: A,B,C
Avaya認定証 3303 3303過去問 3303認証試験
NO.2 A Job is running on Avaya Proactive Contact 5.0 and the system operator notices that not enough
records are selected. The operator wants to change selection criteria to select more records and re-run
the call selection without stopping the job.
How can this be achieved?
A. Change the parameters and re-run the selection from Monitor.
B. Change the parameters and re-run the selection from Editor.
C. Change the parameters and re-run the selection from Command User Interface (CUI).
D. Change the parameters and re-run the selection from Analyst.
Answer: A
Avaya認証試験 3303認証試験 3303 3303認定試験 3303参考書 3303
NO.3 A system operator opens a Job Status view in the Avaya Proactive Contact Monitor and notices that
the status for job EXP100 is shown as Active, but the character-based Job Monitor no longer shows the
job as running. The system operator calls support and asks for an explanation.
Which three actions would you perform to begin troubleshooting the problem? (Choose three.)
A. Log on to the dialer and run check_db and check_mts.
B. Instruct the supervisor on how to generate debugging data in the cd.log file and ask the supervisor to
send you the output for analysis.
C. Tell the supervisor how to locate her personal directory and how to delete all the .cmv files foundthere.
D. Log on to the dialer and run sqlplus, and then enter the following query: SQL> select * from
mo_last_status;
E. Log on to the dialer and run sqlplus, and then enter the following query: SQL> select * from dialerdef;
Answer: A,D,E
Avaya認定証 3303認定試験 3303参考書 3303 3303 3303
NO.4 What should the crontab of a secondary dialer have?
A. pds_maintenance
B. pds_maintenance and db_rnaintenance
C. pds_maintenance and mts_maintenance
D. pds_maintenance, mts_maintenance and db_mainlenance
Answer: B
Avaya認定証 3303 3303 3303問題集
NO.5 A system supervisor calls support to report that when Job Agent view in Monitor is used, agents that are
on break cannot be seen.
What is the reason for this happening?
A. An agent who is on break is not really on a job. The supervisor should see that the agent is still on the
system by looking at a Dialer Agent view Instead.
B. The agents are exiting out of the Proactive Contact Agent (PC Agent) application rather than using the
"Go On Break" option in the PC Agent menu.
C. Display of agents who have used the "Go On Break" function of PC Agent application is not supported
in Monitor.
D. Monitor may not be configured to display agents who are on break.
E. An agent who has used the "Go On Break" function Is shown as "Off Job" in Monitor.
Answer: D
Avaya過去問 3303認証試験 3303練習問題
NO.6 What does db_mgr script do?
A. It stops and starts the database
B. It copies calling lists to *.old.
C. It rolls up the daily data into monthly statistics.
D. It removes all old and outdated files from the system.
E. It runs a backup of the database to DVD.
Answer: B
Avaya 3303認定資格 3303
NO.7 A system is logging errors on a porter process during every reboot/restart of Proactive Contact. Which
two parameters, if mismatched, would cause this? (Choose two.)
A. PORTSinmaster, cfg
B. OPERATORS in master, cfg
C. MAXHIDSLOTS in master, cfg
D. H specified ports configuredindgswitch.cfg
E. N specified ports configured in dgswitch.cfg
Answer: A,E
Avaya認定試験 3303 3303認定証 3303問題集 3303参考書
NO.8 Which hardware component is required for a hard dialer Proactive Contact 5.X.?
A. Avaya Application Enablement Services (AES) 3.1 or later
B. Avaya Enhanced Network Bus Controller (ENBC)
C. Avaya Communication Manager (CM) 3.1 or later
D. TN-744-based Call Classifier Cards version "e" or later
Answer: B
Avaya問題集 3303 3303認証試験 3303
NO.9 In Avaya Proactive Contact 5.0, which application can be used to enable/disable the Agent Job list
feature?
A. Agent Application
B. Command User Interface (System Telnet)
C. Analyst
D. Editor
Answer: B
Avaya 3303 3303認定資格
NO.10 A system operator needs to see failed login attempts on the Avaya Proactive Contact 5.X dialer. Which
login type must be used to see these failed attempts?
A. sysadm
B. system
C. auditor
D. reporter
Answer: C
Avaya 3303過去問 3303 3303認定試験 3303認定試験
NO.11 A business has a three dialer pod (one primary and two secondary) and ten supervisor workstations.
How many Java processes should be running while checking mid-tier services (check_mts)?
A. 3
B. 4
C. 10
D. 13
E. 14
Answer: A
Avaya 3303 3303 3303
NO.12 On the Avaya Proactive Contact Analyst application, which section shows you Non-Contact and Error
summary reports?
A. Agent
B. Job
C. Administrative
D. Agent Monthly
Answer: B
Avaya認定証 3303問題集 3303 3303参考書 3303認定証
NO.13 A system operator reports that agents are randomly being disconnected from Proactive Contact Agent.
You have reviewed the available data and it is inconclusive. Since the problem is intermittent, you need to
set up the dialer so that it will gather the data you need in the future.
Assuming that the current date is February 19, 2011, which command would you enter in the hopes of
recording the next occurrence?
A. tail-facc*0219
B. check_errors 20110219
C. logadm -p opmon |7
D. logcat -p agent
Answer: C
Avaya 3303認定試験 3303問題集
NO.14 Which three should you verify if a network connection error is suspected between the Avaya Proactive
Contact 5.X server and the PG230RM? (Choose three.)
A. Run lanscan and landiag and look for collisions and other errors on the internal network (lan0).
B. Verify the name (switch1) and IP address for the PG230RM matches between the /etc/hosts onthe
AvayaProactiveContact server and in the Network Configuration page on the PG230RM (under the
Current Internet Address).
C. Verify that SWITCHTYPE is set to DIGITAL in /opt/avaya/pds/etc/master.cfg on the Avaya Proactive
Contact server.
D. Verify you have an active flashing LED light on the front of the ENBC card indicating LAN activity.
E. Verify that there are four swif_dg processes running on the Avaya Proactive Contact server.
Answer: A,B,E
Avaya 3303 3303認定試験 3303過去問
NO.15 A system supervisor uses Editor to create a new completion code for use in a Job that will run later in
the day. The job seems to start up without any problem, but when the supervisor looks at Monitor's Job
Completion Code view, no agents are releasing calls using the new code.
Which two Issues would contribute to this problem? (Choose two.)
A. The agents did not get the email describing the new completion code and the conditions for Itsuse.
B. The completion code changes are in the pending state and won't be available to agents until after the
next dialing application restart.
C. The Proactive Contact Agent application has not been updated to use the new completion code.
D. Monitor is not working properly. There should be at least a few calls with the new completion code.
E. The system supervisor forgot to add the new completion code to the agent keys file associated with the
job.
Answer: B,E
Avaya認証試験 3303 3303 3303認定証
JPexamは最新の642-996問題集と高品質の70-481問題と回答を提供します。JPexamのC_TBIT44_73 VCEテストエンジンとNS0-504試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-400 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论