JPexamのウェブサイトをクリックしたら、JPexamに登録した人々が非常にたくさんいることに驚いたでしょう。実はこれは普通なことです。JPexamは毎日異なる受験生に様々なトレーニング資料を提供します。彼らは当社の資料を利用してから試験に受かりました。これは当社が提供したSAPのC_TSCM42_64トレーニング資料が本当に効果的なものということを証明しました。もしあなたも試験に合格したいのなら、JPexamをミスしないでください。JPexamはきっとあなたのニーズを満たせますから。
JPexamはきみのIT夢に向かって力になりますよ。SAPのC_TSCM42_64の認証そんなに人気があって、JPexamも君の試験に合格するために全力で助けてあげて、またあなたを一年の無料なサービスの更新を提供します。明日の成功のためにJPexamを選らばましょう。
試験番号：C_TSCM42_64問題集
試験科目：SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4
最近更新時間：2014-03-11
問題と解答：全80問
100％の返金保証。1年間の無料アップデート。
JPexamは高品質の製品を提供するだけではなく、完全なアフターサービスも提供します。当社の製品を利用したら、一年間の無料更新サービスを提供します。しかも、速いスピードで受験生の皆様に提供して差し上げます。あなたがいつでも最新の試験資料を持っていることを保証します。
SAPのC_TSCM42_64認定試験に受かるためにがんばって勉強していれば、JPexamはあなたにヘルプを与えます。JPexam が提供したSAPのC_TSCM42_64問題集は実践の検査に合格したもので、最も良い品質であなたがSAPのC_TSCM42_64認定試験に合格することを保証します。
JPexamのC_TSCM42_64教材を購入したら、あなたは一年間の無料アップデートサービスを取得しました。試験問題集が更新されると、JPexamは直ちにあなたのメールボックスにC_TSCM42_64問題集の最新版を送ります。あなたは試験の最新バージョンを提供することを要求することもできます。最新のC_TSCM42_64試験問題を知りたい場合、試験に合格したとしてもJPexamは無料で問題集を更新してあげます。
JPexamのC_TSCM42_64問題集を入手してから、非常に短い時間で試験に準備しても、あなたは順調に試験に合格することができます。JPexamの問題集には、実際の試験に出る可能性がある問題が全部含まれていますから、問題集における問題を覚える限り、簡単に試験に合格することができます。これは試験に合格する最速のショートカットです。仕事に忙しいから試験の準備をする時間はあまりないとしたら、絶対JPexamのC_TSCM42_64問題集を見逃すことはできないです。これはあなたがC_TSCM42_64試験に合格できる最善で、しかも唯一の方法ですから。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/C_TSCM42_64_exam.html
NO.1 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP C_TSCM42_64 C_TSCM42_64参考書 C_TSCM42_64
NO.2 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP認証試験 C_TSCM42_64認定証 C_TSCM42_64過去問 C_TSCM42_64練習問題
NO.3 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP練習問題 C_TSCM42_64過去問 C_TSCM42_64認定資格 C_TSCM42_64
NO.4 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP問題集 C_TSCM42_64 C_TSCM42_64
NO.5 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP問題集 C_TSCM42_64過去問 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64問題集
NO.6 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP認証試験 C_TSCM42_64過去問 C_TSCM42_64 C_TSCM42_64認定証
NO.7 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP問題集 C_TSCM42_64過去問 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.8 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP過去問 C_TSCM42_64 C_TSCM42_64参考書 C_TSCM42_64認定試験
NO.9 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP C_TSCM42_64 C_TSCM42_64認証試験 C_TSCM42_64参考書 C_TSCM42_64
NO.10 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP認証試験 C_TSCM42_64 C_TSCM42_64
JPexamは最新の1Z0-033問題集と高品質の000-657問題と回答を提供します。JPexamの70-415 VCEテストエンジンとMB6-871試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-455 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论