The latest Juniper certification JN0-314 exam practice questions and answers

Are you still upset about how to pass Juniper certification JN0-314 exam? Are you still waiting for the latest information about Juniper certification JN0-314 exam? IT-Tests.com has come up with the latest training material about Juniper certification JN0-314 exam. Do you want to pass Juniper certification JN0-314 exam easily? Please add IT-Tests's Juniper certification JN0-314 exam practice questions and answers to your cart now! IT-Tests.com has provided part of Juniper certification JN0-314 exam practice questions and answers for you on www.IT-Tests.com and you can free download as a try. I believe you will be very satisfied with our products. With our products you can easily pass the exam. We promise that if you have used IT-Tests's latest Juniper certification JN0-314 exam practice questions and answers exam but fail to pass the exam, IT-Tests.com will give you a full refund.

There are a lot of sites provide the Juniper JN0-314 exam certification and other training materials for you . IT-Tests.com is only website which can provide you Juniper JN0-314 exam certification with high quality. In the guidance and help of IT-Tests.com, you can through your Juniper JN0-314 exam the first time. The questions and the answer provided by IT-Tests.com are IT experts use their extensive knowledge and experience manufacturing out . It can help your future in the IT industry to the next level.

In this competitive society, being good at something is able to take up a large advantage, especially in the IT industry. Gaining some IT authentication certificate is very useful. Juniper JN0-314 is a certification exam to test the IT professional knowledge level and has a Pivotal position in the IT industry. While Juniper JN0-314 exam is very difficult to pass, so in order to pass the Juniper certification JN0-314 exam a lot of people spend a lot of time and effort to learn the related knowledge, but in the end most of them do not succeed. Therefore IT-Tests.com is to analyze the reasons for their failure. The conclusion is that they do not take a pertinent training course. Now IT-Tests.com experts have developed a pertinent training program for Juniper certification JN0-314 exam, which can help you spend a small amount of time and money and 100% pass the exam at the same time.

Are you worried about how to passs the terrible Juniper JN0-314 exam? Do not worry, With IT-Tests.com's Juniper JN0-314 exam training materials in hand, any IT certification exam will become very easy. IT-Tests.com's Juniper JN0-314 exam training materials is a pioneer in the Juniper JN0-314 exam certification preparation.

Exam Code: JN0-314
Exam Name: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 115 Questions and Answers
Last Update: 2013-11-08

The JN0-314 examination certification, as other world-renowned certification, will get international recognition and acceptance. People around the world prefer JN0-314 exam certification to make their careers more strengthened and successful. In IT-Tests.com, you can choose the products which are suitable for your learning ability to learn.

JN0-314 (Junos Pulse Access Control, Specialist (JNCIS-AC)) Free Demo Download: http://www.it-tests.com/JN0-314.html

NO.1 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A

Juniper   JN0-314 original questions   JN0-314 exam prep   JN0-314 demo

NO.2 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C

Juniper original questions   JN0-314 exam simulations   JN0-314 answers real questions

NO.3 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E

Juniper   JN0-314   JN0-314 exam simulations

NO.4 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A

Juniper   JN0-314 answers real questions   JN0-314   JN0-314 demo

NO.5 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D

Juniper   JN0-314   JN0-314 certification

NO.6 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D

Juniper   JN0-314   JN0-314 exam simulations

NO.7 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D

Juniper test questions   JN0-314 test   JN0-314   JN0-314

NO.8 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A

Juniper   JN0-314   JN0-314 original questions   JN0-314

NO.9 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B

Juniper exam simulations   JN0-314   JN0-314 test answers   JN0-314 pdf   JN0-314

NO.10 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D

Juniper pdf   JN0-314   JN0-314 pdf   JN0-314 test answers   JN0-314 questions

NO.11 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C

Juniper certification training   JN0-314 certification training   JN0-314   JN0-314

NO.12 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B

Juniper dumps   JN0-314   JN0-314   JN0-314   JN0-314 exam simulations

NO.13 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B

Juniper   JN0-314 original questions   JN0-314   JN0-314 certification

NO.14 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B

Juniper braindump   JN0-314   JN0-314   JN0-314 certification   JN0-314   JN0-314 exam

NO.15 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D

Juniper test   JN0-314   JN0-314   JN0-314   JN0-314   JN0-314 study guide

IT-Tests.com offer the latest 70-463 Questions & Answers and high-quality C_TSCM62_65 PDF Practice Test. Our 000-652 VCE testing engine and 000-156 study guide can help you pass the real exam. High-quality 100-101 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-314.html