IT-Tests.com can provide a shortcut for you and save you a lot of time and effort. IT-Tests.com will provide good training tools for your Juniper certification JN0-101 exam and help you pass Juniper certification JN0-101 exam. If you see other websites provide relevant information to the website, you can continue to look down and you will find that in fact the information is mainly derived from our IT-Tests. Our IT-Tests.com provide the most comprehensive information and update fastest.
If you do not know how to pass the exam more effectively, I'll give you a suggestion is to choose a good training site. This can play a multiplier effect. IT-Tests.com site has always been committed to provide candidates with a real Juniper JN0-101 certification exam training materials. The IT-Tests.com Juniper JN0-101 Certification Exam software are authorized products by vendors, it is wide coverage, and can save you a lot of time and effort.
Are you IT person? Do you want to succeed? If you want to succeed, please do to buy IT-Tests's Juniper JN0-101 exam training materials. Our training materials have through the test of practice. it can help you to pass the IT exam. With the IT-Tests.com's Juniper JN0-101 exam training materials, you will have better development in the IT industry. You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? IT-Tests.com's Juniper JN0-101 exam training materials will satisfy your desire. We are through thick and thin with you and to accept this challenge together .
IT-Tests.com have a huge senior IT expert team. They use their professional IT knowledge and rich experience to develop a wide range of different training plans which can help you pass Juniper certification JN0-101 exam successfully. In IT-Tests.com you can always find out the most suitable training way for you to pass the exam easily. No matter you choose which kind of the training method, IT-Tests.com will provide you a free one-year update service. IT-Tests's information resources are very wide and also very accurate. When selecting IT-Tests, passing Juniper certification JN0-101 exam is much more simple for you.
IT-Tests.com can provide professional and high quality products. It is the industry leader in providing IT certification information. To selecte IT-Tests.com is to choose success. IT-Tests.com's Juniper JN0-101 exam training materials is your magic weapon to success. With it, you will pass the exam and achieve excellent results, towards your ideal place.
Exam Code: JN0-101
Exam Name: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 190 Questions and Answers
Last Update: 2013-09-18
If you buy IT-Tests's Juniper certification JN0-101 exam practice questions and answers, you can not only pass Juniper certification JN0-101 exam, but also enjoy a year of free update service. If you fail your exam, IT-Tests.com will full refund to you. You can free download part of practice questions and answers about Juniper certification JN0-101 exam as a try to test the reliability of IT-Tests's products.
JN0-101 (JNCIA-JUNOS EXAM OBJECTIVES) Free Demo Download: http://www.it-tests.com/JN0-101.html
NO.1 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D
Juniper JN0-101 original questions JN0-101 JN0-101 JN0-101 dumps JN0-101
NO.2 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A
Juniper JN0-101 test JN0-101 pdf
NO.3 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB
Juniper JN0-101 JN0-101
NO.4 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC
Juniper test questions JN0-101 exam JN0-101 JN0-101 exam dumps
NO.5 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A
Juniper JN0-101 JN0-101 JN0-101 JN0-101 answers real questions
NO.6 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D
Juniper braindump JN0-101 test questions JN0-101
NO.7 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A
Juniper JN0-101 exam dumps JN0-101 certification training
NO.8 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D
Juniper original questions JN0-101 JN0-101 JN0-101 exam dumps JN0-101
NO.9 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D
Juniper JN0-101 JN0-101 exam prep
NO.10 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B
Juniper certification training JN0-101 JN0-101 JN0-101
NO.11 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A
Juniper JN0-101 pdf JN0-101 test answers
NO.12 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD
Juniper certification JN0-101 JN0-101 JN0-101 JN0-101 exam
NO.13 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C
Juniper JN0-101 demo JN0-101 study guide JN0-101 certification JN0-101
NO.14 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD
Juniper original questions JN0-101 JN0-101 exam prep JN0-101 JN0-101 pdf JN0-101
NO.15 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC
Juniper answers real questions JN0-101 JN0-101 certification training
NO.16 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C
Juniper exam dumps JN0-101 JN0-101 test questions
NO.17 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD
Juniper pdf JN0-101 JN0-101 demo JN0-101 JN0-101 JN0-101
NO.18 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C
Juniper JN0-101 JN0-101
NO.19 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A
Juniper braindump JN0-101 JN0-101
NO.20 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD
Juniper JN0-101 original questions JN0-101 JN0-101 test answers JN0-101 exam dumps
IT-Tests.com offer the latest ICGB Questions & Answers and high-quality 200-101 PDF Practice Test. Our 000-657 VCE testing engine and 000-783 study guide can help you pass the real exam. High-quality 70-461 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.it-tests.com/JN0-101.html
没有评论:
发表评论