JPexamにたくさんのIT専門人士がいって、弊社の問題集に社会のITエリートが認定されて、弊社の問題集は試験の大幅カーバして、合格率が１００％にまで達します。弊社のみたいなウエブサイトが多くても、彼たちは君の学習についてガイドやオンラインサービスを提供するかもしれないが、弊社はそちらにより勝ちます。JPexamは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。そして、弊社が提供した問題集を安心で使用して、試験を安心で受けて、君のEMC E20-597認証試験の１００％の合格率を保証しますす。
EMCのE20-597認定試験は全てのIT職員にとって大変重要な試験です。この試験に受かったら、あなたは絶対職場に廃れられることはありません。しかも、昇進と高給も実現できます。EMCのE20-597試験に受かったら成功への鍵を握ったと言った人もいます。これは間違いないです。JPexamのEMCのE20-597試験トレーニング資料はあなたが成功へのショートカットです。このトレーニング資料を持っていたら、成功への道を見つけます。
試験番号：E20-597問題集
試験科目：Backup and Recovery Specialist Exam for Storage Administrators
最近更新時間：2014-02-10
問題と解答：全168問
100％の返金保証。1年間の無料アップデート。
IT領域での主要な問題が質と実用性が欠くということを我々ははっきり知っています。JPexamのEMCのE20-597の試験問題と解答はあなたが必要とした一切の試験トレーニング資料を準備して差し上げます。実際の試験のシナリオと一致で、选択問題（多肢選択問題）はあなたが試験を受かるために有効な助けになれます。JPexamのEMCのE20-597の試験トレーニング資料は検証した試験資料で、JPexamの専門的な実践経験に含まれています。
Pass4Tesを通じて最新のEMCのE20-597試験の問題と解答早めにを持てて、弊社の問題集があればきっと君の強い力になります。
どんな業界で自分に良い昇進機会があると希望する職人がとても多いと思って、IT業界にも例外ではありません。ITの専門者はEMCのE20-597認定試験があなたの願望を助けって実現できるのがよく分かります。JPexamはあなたの夢に実現させるサイトでございます。
JPexamのシニア専門家チームはEMCのE20-597試験に対してトレーニング教材を研究できました。JPexamが提供した教材を勉強ツルとしてEMCのE20-597認定試験に合格するのはとても簡単です。JPexamも君の１００％合格率を保証いたします。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/E20-597_exam.html
NO.1 Refer to the exhibit. In an EMC NetWorker environment, the storage node sn1 is down for maintenance.
According to the client properties, what happens when the backup of the client starts?
A. The backup data will be sent to the storage node sn2.
B. The backup will fail as the storage node sn1 is not available.
C. The backup data will be sent to any available storage node.
D. The backup data will be sent to the NetWorker server.
Answer: A
EMC E20-597 E20-597認証試験 E20-597 E20-597 E20-597認定資格
NO.2 What is a characteristic of VCB backups in EMC NetWorker?
A.Supports image and file-based backups
B.Requires a NetWorker client on each virtual machine
C.Requires a storage node on the VCB backup proxy
D.Does not support LAN-free backup
Answer: A
EMC E20-597 E20-597認定試験 E20-597
NO.3 A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving
the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96.?
A. Set device max sessions to 96.
B. Configure group parallelism to 96.
C. Enable diagnostic mode.
D. Add NetWorker Storage Node Enabler Code.
Answer: D
EMC認定証 E20-597 E20-597
NO.4 Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Requestor
B. Provider
C. Writer
D. Interceptor
Answer: B
EMC認定試験 E20-597問題集 E20-597過去問 E20-597 E20-597練習問題
NO.5 Refer to the exhibit. An EMC NetWorker customer has two data zones, A and B, with autochanger AC1
and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is
configured as a shared autochanger.
Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
A. 2
B. 0
C. 4
D. 6
Answer: B
EMC E20-597参考書 E20-597認定証 E20-597認定試験
NO.6 What is a characteristic of cloud volumes in EMC NetWorker?
A.Infinitely appendable
B.Recyclable
C.Space cannot be reclaimed.
D.Data cannot be compressed or encrypted.
Answer: A
EMC E20-597問題集 E20-597 E20-597認定試験
NO.7 What is the backup command specified in the EMC NetWorker client resource for EMC Centera
backups?
A.savepnpc
B.nsrdasv
C.nsrndmp_save
D.nsrsnap_vss_save.exe
Answer: C
EMC E20-597 E20-597 E20-597認定資格
NO.8 A customer has the following EMC NetWorker configuration:
How many nsrlcpd processes are running on the NetWorker server?
A. 4
B. 12
C. 16
D. 0
Answer: D
EMC E20-597 E20-597 E20-597
NO.9 An EMC NetWorker customer wants to perform a complete backup of a SQL server with three
databases. Which save set name should be used?
A.MSSQL:DB
B.MSSQL:*
C.MSSQL:ALLDB
D.MSSQL:
Answer: D
EMC認定試験 E20-597 E20-597
NO.10 You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives.
Two drives each are dedicated to the server and storage node. A new Celerra has been added to the
network with 500 GB of data. What must be done to back up the data on the Celerra?
A. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.
B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this
device.
C. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or
storage node.
D. Create an NDMP backup pool and add this pool to a save group with other clients.
Answer: C
EMC E20-597 E20-597 E20-597過去問
NO.11 A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk
Library. To ensure that the embedded storage node is used to read the data during clone operations, what
is required?
A.Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.
B.Set the clone storage node value for the embedded storage node client resource to itself.
C.Create a client for the embedded storage node.
D.Create a clone pool and assign the appropriate rights to it.
Answer: A
EMC E20-597参考書 E20-597問題集 E20-597
NO.12 What is a characteristic of EMC NetWorker SnapImage module backups?
A.Block-level backups of dense file systems
B.Fast block-level backups of a file system mounted on a proxy server
C.Immediate recovery of a file system from a persistent snapshot
D.SAN-based image-level backup and recovery of file systems
Answer: A
EMC E20-597認定資格 E20-597 E20-597
NO.13 When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service
must be restarted on the client for the change to take effect?
A. nsrd
B. nsrexecd
C. nsrindexd
D. nsrdb
Answer: B
EMC認定試験 E20-597認定試験 E20-597 E20-597
NO.14 What is a characteristic of how the EMC NetWorker modules integrate with native applications?
A. The developer of the native application provides a NetWorker module to allow for protection of their
application with NetWorker.
B. The NetWorker module runs on the NetWorker server and acts as an intermediary for data coming
from the NetWorker client module.
C. The NetWorker module acts as an intermediate layer between NetWorker and the native application.
D. The NetWorker module always takes the place of the standard NetWorker client allowing for backup of
applications and file systems.
Answer: C
EMC参考書 E20-597練習問題 E20-597過去問
NO.15 You have successfully configured three SQL servers for backup with the EMC NetWorker Module for
SQL. These servers are configured as follows:
Scheduled backup of the group shows that all SQL data from the three servers was successfully backed
up. However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you
only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Modify the browse time within the NetWorker user GUI to show the period for which you want to
recover.
B. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
C. Modify the save set to include an instance or database name after MSSQL:.
D. Launch the NetWorker User for SQL.
Answer: D
EMC E20-597認定試験 E20-597問題集 E20-597 E20-597認定試験 E20-597
JPexamは最新のC_HANATEC131問題集と高品質のC_TFIN22_64問題と回答を提供します。JPexamのC4040-124 VCEテストエンジンとHP2-N43試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1Z1-061 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论